This item includes a 48V-314Ah Battery and a 11KW Solar Inverter (EU 230V single phase). Compatible work with LiFePO4 battery via RS485. Features of Inverter Wifi remote monitoring optional. We have a professional solar inverter engineering team with more than 10 years of solar inverter R&D experience.
【RS485&CAN Communication】 The RS485 and CAN ports allow seamless communication with most 48V inverters for comprehensive monitoring of your solar battery. We have a professional solar inverter engineering team with more than 10 years of solar inverter R&D experience.
Capacity: 216Ah. Energy Storage: 11.06kWh. Battery Chemistry: LiFePO4. Improved cell consistency. Cell Type: Grade A EV Cells. 1 pair of 5ft (Black + Red) battery cables. Maximum Units in Parallel: 6.
This item includes a 48V-314Ah Battery and a 12KW Solar Inverter （US 120V Single Phase/ 240V Split Phase）. Available infour charging modes : Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging.
【12/24V MPPT with 99% Tracking Efficiency】Given Innovation MPPT technology’s high tracking efficiency of up to 99% and peak conversion efficiency of 98%, the Power Queen MPPT Charge Controller can track arrays’ maximum power point to get the most power to charge the battery and loads. It improves the energy utilization ratio by 15%-20% when compared to conventional PWM controllers. 【Intuitive LCD Display & Remote Monitoring】The Power Queen MPPT Controller includes an LCD screen and multiple LED indicators, and it’s intended to display information about system operation, customizable parameters, and error codes. It includes a Bluetooth adaptor with an RJ12 port and can be used with the integrated RS232 communication protocol to remotely monitor the real-time status of the solar panel, battery, and loads. 【LiFePO4 Default Setting & Widely Use Range】The Power Queen 12/24V 30 Amp MPPT Charge Controller was conceived in response to the widespread demand from lithium battery users for a dedicated LiFePO4 battery controller. It’s intended for LiFePO4 batteries, with a 12V LiFePO4 default setting, but it’s also adaptable to Gel, Sealed, Flooded, and Lead-Acid batteries by manually setting. 【Solid Case Design & Built-in Multiple Protections】The utilization of a die-cast aluminum heat sink increases heat dissipation efficiency, which reduces power loss due to heat. And it can operate at full load in temperatures ranging from -31°F to 113°F. Over-voltage, over-power, short-circuit, reverse-connection, reverse-charging, and over-temperature protection are all built-in, ensuring total protection from the solar panels to the load terminal. 【Complete Accessories Are Available in One Package】Power Queen MPPT Charge Controller provides the most comprehensive installing accessories for setting up a solar charge system. The accessories contain a copper wire connector* 6, heat shrink tubing* 6, mounting brackets * 4, and screws*8. The copper wire connector provides a larger contact area between the wire and the MPPT for increased overcurrent capability. Specification: Model : PQ2430 Rated Charging Current : 30ASystem Voltage: 12V(Default) / 24V / Auto Rated Load Current: 20ARated charging current:30ABattery Voltage: 9V to 32V Operating Temperature: -31°F to 113°F / -35°C to 45°CMax. Power Point Voltage Range : Battery Voltage +3V to 76V Conversion Efficiency: ≤97%Max. Solar Input Voltage : 100V(77°F / 25°C) / 90V(-13° F / -25°C) MPPT Tracking Efficiency : 99.9%Max. Solar Panel System Input Power: 450W for 12V / 900W for 24V Communication Method: RS485(RJ12)/Built-in BTTemperature Compensation Factor: -3mv/°F or °C / 2V (Default) Weight: 4.41lb / 2kgTemperature Sensor: Yes (Only for Lead-Acid battery) Dimensions：L245*W82.5*H180mm Package Included:Power Queen 30A MPPT Charge Controller*1 Remote Temperature Sensor (for Lead-Acid battery)*1 Mounting Brackets*4 Mounting Screws*12 Copper Wire Connector*6 Heat Shrink Tubing for cable*6 Installation Guide*1 User Manual*1 Expansion Tube*4 On Jun 3, 2024 at 22:23:07 PDT, seller added the following information:
⚠️ CONFIGURATION NOTE: This product was originally created as a “Light” version (i.e. the factory variant without connectivity), but comes here with the integrated Fronius Datamanager. This additional module unlocks connectivity WLAN (Wi-Fi) and Ethernet, allowing complete monitoring of the system and access to Solar.web, maintaining the exact same quality of feeding into the network as the standard version. Fronius Symo 5.0-3-M is a transformerless three-phase inverter designed to offer high configuration flexibility thanks to 2 MPPTs and a wide usable MPP voltage range. The nominal output power on the AC side is 5,000 W, with a maximum output power of 5,000 VA. The starting voltage is 200 V and the maximum DC voltage is 1,000 V, characteristics that facilitate the design of strings with.
This “Light” version includes the DataManager for data communication (WLAN/Ethernet), allowing system monitoring and access to Solar.web, maintaining the same quality of network input. The Primo 5.0-1 Light is a single-phase inverter for grid connection designed to guarantee high reliability and durability in the photovoltaic sector. With a nominal power of 5 kW, it ensures stable synchronization with the electricity grid, optimizing the use of the energy produced by the solar system and contributing to reducing consumption on the bill. ? This “Light” version includes the DataManager for data communication (WLAN/Ethernet), allowing system monitoring and access to Solar.web, maintaining the same quality of network input. In case of maintenance it is necessary to remove only the inverter cas.
⚠️ CONFIGURATION NOTEThis is the “Light” version, the variant without data connectivity and integrated monitoring. It does not include the Fronius Datamanager card, therefore the inverter does not have a standard Wi-Fi/Ethernet connection, datalogger and webserver for accessing Solar.web. The performance and feed-in quality remain identical to the standard version. ⚠️ CONFIGURATION NOTE: This is the “Light” version, the variant without WLAN (Wi-Fi) and Ethernet connectivity as standard. The inverter is supplied without the Datamanager card, therefore it does not have wireless functionality for remote monitoring on Solar.web and data management. The technical performance and feed-in quality remain identical to the standard version. As a result, functions such as connection to Solar.web vi.
This “Light” version includes the DataManager for data communication (WLAN/Ethernet), allowing system monitoring and access to Solar.web, maintaining the same quality of network input. The Fronius Primo 5.0-1 Light is a single-phase inverter for grid connection designed to ensure high reliability and durability in the photovoltaic sector. With a nominal power of 5 kW, it ensures stable synchronization with the electricity grid, optimizing the use of the energy produced by the solar system and contributing to reducing consumption on the bill. ? This “Light” version includes the DataManager for data communication (WLAN/Ethernet), allowing system monitoring and access to Solar.web, maintaining the same quality of network input. In case of maintenance it is necessary to remove only the inverte.
The starting voltage is 200 V and the maximum DC voltage is 1,000 V, features that facilitate the design of strings with different configurations and operating conditions. The Symo platform is designed to adapt to different plant orientations and layouts via 2 MPPTs and a wide MPP voltage range, facilitating use even in complex design scenarios. The “Light” version is a variant of the Symo family, designed for configurations in which the maximum range of interfaces/functionality of the full version is not needed. Fronius Symo 5.0-3-M Light it is the variant without Fronius Datamanager (datalogger), therefore it does not include the integrated datalogging and webserver typical of the full version. Accordingly, functions such as connection to Fronius Solar.web via WLAN/Ethernet and protocols.
